Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Denver, CO
Denver’s alley-facing garages make gate installation a different job here than in newer suburbs. Most of the city’s core neighborhoods were built between the 1920s and the 1960s, and the garage behind the house, not the front yard, is usually the real security line. Combine 40-to-70-year-old posts with clay soil that swells and shrinks through every freeze-thaw cycle, and a new gate has to be set with the ground movement in mind, not just bolted to whatever is already there. We install driveway, sliding, and automatic gates across Denver, and we work on the brand you already have. Call (866) 509-8380 for a free estimate.
Why Denver Homes Are Different
Denver’s freeze-thaw cycles do more to gate hardware than most homeowners expect. Clay soil takes on water during spring melt, expands, then contracts hard after the first freeze, and every post in the ground moves with it. Hinges loosen, wooden gates warp and stick, and a gate that swung clean in October drags on the apron by January. The city’s older housing stock compounds it. Bungalows and Tudors in Park Hill, Montclair, and Hilltop were built with detached single-car garages reached by shared alleys, and plenty of the alley gates on those lots are still hanging on original posts. Drainage rules in those alleys put the gate at the low point of the apron, so snowmelt and summer downpours pool at the bottom rail and rust the hinge plates first. That’s the failure pattern we see most in Denver, and it’s a year-round repair category here in a way it simply isn’t in suburbs without alleys.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Denver Services
Denver homeowners and property managers call us about two things more than any other: fixing a gate that’s stopped working and repairing the electric or automatic system behind it.
Gate Repair in Denver
Alley gates in Denver take a beating that front-yard fences never see. Sagging hinges, warped wooden panels, posts that have heaved out of plumb after a hard freeze, and bottom rails rotted from standing snowmelt are the routine jobs here. We diagnose the whole gate, not just the symptom, so a gate that drags gets checked at the hinge, the post, and the latch before anyone starts adjusting hardware. Old chain-link and wooden alley gates on original posts often need the post reset before the swing will ever be right again. For a gate that’s stuck, dragging, or won’t latch, Gate Repair in Denver covers what we handle and how we price it.

Electric Gate Repair in Denver
An automatic gate that won’t open is usually an operator problem, not a gate problem, and the two get confused constantly. We test the operator, the wiring, and the safety edges separately from the gate itself, so you’re not paying to replace hardware that was never the issue. Denver’s temperature swings are hard on control boards and battery-backed operators, and a system that fails after the first cold snap is often a power or board fault rather than a mechanical one. We work on LiftMaster, FAAC, and other systems directly. For operator diagnostics and repair, Electric Gate Repair in Denver explains what we check and what it typically costs.

Gate Installation in Denver
Gate installation in Denver has to account for ground that moves twice a year. In the city’s alley neighborhoods, posts sit in clay that expands through spring melt and contracts hard after the first freeze, so a gate set the same way it would be in sand or gravel will be out of alignment within a season or two. Older lots in Park Hill and Montclair often have original posts that were never set to proper footing depth, which is why replacement work there usually starts below grade rather than at the hinge. We measure the opening, check the existing posts and the apron drainage, and match the gate and operator to how the property is actually used. If your driveway gate needs replacing rather than repairing, Gate Installation covers the full process from measurement to final adjustment.
Driveway Gate Installation
Signs you need it
Your driveway gate is beyond repair when the posts have heaved or rotted through, the frame is warped past adjustment, or the opening has settled enough that no hinge setting will make it swing true.
What it costs in Denver
Driveway gate installation in Denver typically runs $2,800 to $7,500, depending on gate size, material, and whether new posts and footings are needed.
How we do it
We measure the opening and check drainage at the apron, set new posts to proper footing depth, hang the gate, and adjust the swing and latch before we leave.
Automatic Gate Installation
Signs you need it
You’re ready for an automatic gate when manually opening and closing a heavy driveway gate has become a daily hassle, or when you want controlled access without leaving the vehicle.
What it costs in Denver
Automatic gate installation in Denver typically runs $3,500 to $9,000, including the operator, safety edges, and the power run.
How we do it
We mount the operator to the gate and post, run the power, install the safety edges and access controls, then test the full cycle and set the limits.
What Gate Installation Costs in Denver
| Item | Typical range in Denver |
|---|---|
| Driveway gate installation | $2,800 – $7,500 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $3,200 – $8,500 |
Do I need a permit to install a gate in Denver?
Most gate installations in Denver need a permit, especially when new posts, footings, or electrical work are involved. Ask the city’s building department before work starts, and check any HOA rules for alley-facing gates first. Call (866) 509-8380 for a free estimate.
How long does gate installation take in Denver?
Most residential gate installations in Denver take one to two days once the gate and operator are on site. Custom fabrication or a new power run can add time. We confirm the schedule and the written price before any work begins. Call (866) 509-8380 for an exact quote.
Brands We Service in Denver
We work on the brand you already have: LiftMaster, FAAC, BFT, Mighty Mule, and the rest of the nine operator brands we handle. We don’t claim to stock parts locally, so turnaround depends on the part, and we’ll tell you the expected timeline upfront. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Denver, CO
| Service | Typical range in Denver |
|---|---|
| Driveway gate installation | $2,800 – $7,500 |
| Automatic gate installation | $3,500 – $9,000 |
| Sliding gate installation | $3,200 – $8,500 |
| Gate repair | $150 – $600 |
| Electric gate repair | $200 – $850 |
| Gate operator replacement | $900 – $2,500 |
In Denver, price climbs fastest when posts need resetting to proper footing depth, when the gate is oversized for the opening, or when a power run has to be added for an automatic operator. Every job is quoted and agreed in writing before any work starts, so the estimate you sign is the price you pay.
Neighborhoods We Serve in Denver
We work across Denver’s alley neighborhoods and the surrounding east-side and west-side blocks, from older brick bungalows with detached garages to newer ranch tracts. Fast dispatch from 7am to 7pm, Sunday through Friday, covers the whole city, and we’ll give you a realistic arrival window when you call.
- Park Hill
- Montclair
- Hilltop
- Washington Park
- Cherry Creek
Service Area – Cities Near Denver
Beyond Denver itself, we cover the surrounding metro for the same gate work: repair, electric gate repair, and installation. That includes Commerce City, CO, Westminster, CO, Thornton, CO, and Lakewood, CO. The alley and clay-soil conditions in Denver’s core don’t apply everywhere in the metro, so we assess each property on its own ground and drainage. Call (866) 509-8380 to confirm coverage for your address.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Denver
We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday. Most Denver calls are booked into the next available opening, and we’ll give you a window when you call. Call (866) 509-8380.
Most gate installations in Denver require a permit, particularly with new footings or electrical work, and HOAs often have their own rules for alley-facing gates. Check with the city’s building department and your HOA before work starts. Call (866) 509-8380 for a free estimate.
Yes. We cover Denver and the surrounding cities, including Commerce City, Westminster, Thornton, and Lakewood. Call (866) 509-8380 to confirm your address and get a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Denver Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Ernesto Torres"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Lucia Herrera"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Eric Norris