Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lakewood, CO
If your driveway gate won’t open, drags on the ground, or leans after another hard Front Range freeze, you’re likely weighing a rebuild against a full replacement. Stratford Gate Repair is a gate-specialist company – we handle gate repair, electric gate repair, and gate installation, nothing else. In Lakewood, most of the work we get called for is on original wood, chain-link, and wrought-iron gates attached to homes built between the 1950s and 1970s, where the hardware has outlived the post it’s bolted to. Call (866) 509-8380 to talk through what your gate is doing. We answer 24/7. Fast dispatch from 7am to 7pm.
Thinking about a new gate? Learn how we approach Gate Installation from measurement through final hang. For a stuck or sluggish gate, our gate repair team handles the mechanical side, and our electric gate repair specialists handle operators and controls. For the full range of what we do, see Stratford Gate Repair.
Why Lakewood Homes Are Different
Lakewood grew up as a post-war suburb strung along the Front Range, and that origin shapes nearly every gate we look at here. The housing stock is dominated by 1950s to 1970s ranch and split-level homes on generous lots, which means a large share of Lakewood gate work is retrofit and repair on aging residential driveway and backyard gates rather than brand-new installs. A lot of these gates are still hanging on original hinges, on posts that have been in the ground for decades.
The ground itself is the bigger issue. Clay-heavy soil along the Green Mountain and Bear Creek foothills slopes heaves with each freeze-thaw cycle, so posts push out of plumb every spring and gates start dragging or catching on the latch side. Summer UV bakes and warps wood panels, and spring hail and high winds torque hinge hardware and bend frames. On top of that, Lakewood is a dense patchwork of unincorporated pockets and HOA-governed subdivisions, so fence-height rules and gate specs can change from one block to the next around Green Mountain and Belmar. Before we touch a gate, we need to know which jurisdiction or HOA controls that parcel.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Lakewood Services
These are the two jobs Lakewood homeowners and property managers call us about most – mechanical gate repair and electric or automatic gate repair.
Gate Repair in Lakewood
Most of the repair calls we get in Lakewood come down to hardware and posts. Rusted hinges, sagging gates that scrape the driveway, a latch that won’t catch, a post heaved out of plumb by clay soil – these are rebuild jobs more often than replacement jobs, and the fix usually involves re-setting the post to a deeper footing and rebuilding the hinge side rather than swapping the whole gate. We look at the panel, the frame, the latches, the hinges, and the post footing before recommending anything. If your gate needs this kind of work, start with Gate Repair in Lakewood.

Electric Gate Repair in Lakewood
Automatic gates in Lakewood fight the same freeze-thaw pressure as manual ones, but the consequences are worse: a heaving post can put the gate panel out of square with the operator, and the motor starts straining against a bind that isn’t its fault. We diagnose by system knowledge rather than guesswork, working on LiftMaster, DoorKing, Elite, and Mighty Mule operators among others, and we look at the whole gate – arm, board, sensors, safety edges, track – before we decide what’s actually failed. Our Electric Gate Repair in Lakewood page covers operators in more detail.

Gate Installation in Lakewood
New gate installation in Lakewood is usually a retrofit problem before it’s an installation problem. Because so much of the city’s housing dates to the 1950s through the 1970s, the typical job starts with a gate line that’s already heaved, an existing post that’s too shallow for the clay-heavy soil along the Green Mountain and Bear Creek slopes, or a wall and driveway that were never designed for an automatic operator. We measure first, then set footings deep enough to hold through freeze-thaw cycles, then hang and align. If the site is tight, we’ll say so before we order anything.
Driveway Gate Installation
Signs you need it
Your driveway gate is original to a 1960s or 1970s home, the post is leaner than it was last spring, and the panel is warping or splitting from years of Front Range sun.
What it costs in Lakewood
Most driveway gate installations here fall in the $3,200-$8,500 range depending on span, material, and whether an operator is included, with the written estimate setting the final figure.
How we do it
We measure the opening and check the post line and soil, set new footings to proper depth for the clay, hang the panel and hardware, then check swing or slide clearance across the full arc before we leave.
Automatic Gate Installation
Signs you need it
You’re adding an automatic gate for access control, or the existing manual gate is too heavy or too far from the house to open and close comfortably by hand.
What it costs in Lakewood
Automatic gate installation typically runs $4,500-$12,000 in Lakewood depending on gate type, operator brand, and whether a power run and safety edges are part of the job.
How we do it
We spec the operator to the gate’s weight and cycle count, plan the power run, mount the operator and safety edges, then test open, close, and reverse cycles until the whole system stops and starts cleanly.
What Gate Installation Costs in Lakewood
| Item | Typical range in Lakewood |
|---|---|
| Driveway gate installation (manual) | $3,200-$8,500 |
| Automatic gate installation | $4,500-$12,000 |
| Sliding gate installation | $3,800-$9,500 |
How long does a new gate take to install in Lakewood?
Most residential gate installations in Lakewood take one to two days once materials are on site. Setting footings in clay soil and letting them cure can add time, so we schedule the measure and the install separately and give you a written price before we order.
Do you handle the power run and the safety edges?
Yes. For automatic gates we plan the power run and install safety edges and reversing sensors as part of the job. Call (866) 509-8380 for a free on-site estimate. We answer 24/7. Fast dispatch from 7am to 7pm.
Brands We Service in Lakewood
We work on the brand you already have. Our technicians are familiar with LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, from entry-level residential openers to high-cycle commercial operators. We don’t claim stocked parts – every job is ordered to your system. See our brands for the full picture, and expect turnaround set by parts availability, not a guess.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lakewood, CO
Every price below is an estimate for planning. Your written estimate sets the final number, and we quote and agree before any work starts.
| Service | Typical range in Lakewood |
|---|---|
| Driveway gate installation (manual) | $3,200-$8,500 |
| Automatic gate installation | $4,500-$12,000 |
| Sliding gate installation | $3,800-$9,500 |
| Electric gate repair | $180-$650 |
| Gate repair (hardware, hinges, sag) | $150-$550 |
| Gate post re-set and footing | $250-$750 |
In Lakewood, the biggest price drivers are post work in clay soil and whether an automatic gate needs a power run. We quote and agree the price before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Lakewood
We work across Lakewood, from the foothills slopes around Green Mountain to the subdivisions near Belmar and out toward the Bear Creek corridor. Because the city is a patchwork of incorporated and unincorporated pockets, we confirm jurisdiction or HOA rules for each parcel before we start. Response times across Lakewood are typically fast – call and we’ll confirm the earliest dispatch window for your address.
- Green Mountain
- Belmar
- Bear Creek
- Lakewood (downtown core)
Service Area – Cities Near Lakewood
Lakewood sits in the middle of the metro, so we cover the surrounding cities too. If you’re just outside the Lakewood line, we serve Arvada, CO, Denver, CO, Westminster, CO, and Highlands Ranch, CO as well. Call (866) 509-8380 to confirm your address and get a free estimate.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lakewood
We answer the phone 24/7 and dispatch Sunday through Friday, 7am to 7pm. Most Lakewood calls get a same-day visit if you call early in the day. A call outside dispatch hours is booked into the next opening.
We’ll flag what your city or HOA likely requires and point you to the right office, but the permit and HOA approval are the property owner’s to secure. Lakewood’s unincorporated pockets and HOA-governed subdivisions can have different rules block to block, so confirm early.
Yes. We cover incorporated Lakewood and the unincorporated pockets that share the same address base, plus nearby Arvada, Denver, Westminster, and Highlands Ranch. Call (866) 509-8380 with your address and we’ll confirm coverage.
Ready to get your gate working again or plan a new one? Call (866) 509-8380 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Lakewood Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Ernesto Torres"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Lucia Herrera"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Eric Norris