Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Highlands Ranch?
Gate repair in Highlands Ranch typically costs $185 to $650, with most driveway and automatic gate repairs landing between $250 and $475. Simple fixes like a misaligned latch, a worn hinge, or a remote that won’t pair run $185 to $290, while electric gate repairs involving the operator, control board, or safety sensors usually fall in the $300 to $650 range. Larger work, like a bent slide gate track or a failed commercial operator, runs higher, and the written estimate you get on-site sets the final price.
We’re Stratford Gate Repair, and gates are the only thing we work on. Our technicians have up to experience, we’re licensed and insured, and estimates are free. That matters in a market like Highlands Ranch, where most homes sit behind an HOA with an access gate, and where a gate that won’t open isn’t a small annoyance. It’s the way you get in and out of your own neighborhood.
If your gate is stuck right now, call (866) 509-8380. We answer 24/7 and can usually get a technician out the same day.
Key Takeaways
- Typical gate repair in Highlands Ranch: $185 to $650, with most jobs between $250 and $475.
- Electric and automatic gate repairs sit at the higher end because the operator, wiring, and safety sensors all come into play.
- Manual swing and slide gate repairs are usually the least expensive because there’s no control system to diagnose.
- Free on-site estimates, licensed and insured technicians, and same-day service in most cases.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, residential and commercial.
Gate Repair Cost Breakdown (2026)
Here’s how gate repair pricing breaks down in the Highlands Ranch market for 2026. These are typical ranges we see on estimates. Your exact price depends on the gate, the operator, and what we find on-site.
| Repair Type | Typical Cost Range | What’s Usually Involved |
|---|---|---|
| Manual swing gate adjustment (sagging, latch, hinge) | $185 – $290 | Re-hanging the gate, tightening or replacing hinges, realigning the latch and strike |
| Slide gate wheel or track repair | $220 – $420 | Replacing rollers, straightening or replacing a section of track, adjusting the gate to roll true |
| Gate operator diagnosis and minor repair | $250 – $400 | Troubleshooting the control board, limit switches, and wiring; replacing small components |
| Remote, keypad, or receiver replacement | $185 – $350 | Replacing or reprogramming remotes, keypads, and receivers |
| Safety sensor or photo-eye replacement | $220 – $385 | Replacing or realigning sensors so the gate reverses properly |
| Control board replacement | $375 – $650 | Diagnosing the board, ordering the right part for the brand, and reprogramming limits |
| Operator motor or gear replacement | $450 – $650+ | Rebuilding or replacing the drive components inside the operator housing |
| Hinge, roller, and hardware replacement (full set) | $200 – $375 | Replacing worn hardware across the gate leaf to restore alignment and travel |
| Commercial gate repair (FAAC, BFT, DoorKing) | Quoted per job | High-cycle operators, access control integration, and heavier gate hardware; priced after on-site assessment |
What drives the number up or down? The biggest factor is whether the problem lives in the gate itself or in the operator. A sagging manual gate is usually a hardware fix, which keeps you at the low end. A gate that won’t open or won’t reverse sits inside a control system with a motor, a board, safety sensors, and wiring, and the diagnosis takes longer because more can go wrong. Brand matters too. Parts for a Mighty Mule or Ghost Controls residential operator are generally easier to source and less expensive than components for a FAAC or BFT commercial unit.
Gate weight and material play a role. A light ornamental gate moves with less effort than a heavy cedar or steel gate, and heavier gates wear through hardware and drive components faster. If a slide gate’s track has shifted because the ground moved under it, the repair includes resetting the track, not just swapping a roller. And if the gate is part of an access-control system with a keypad, intercom, or telephone entry, the diagnosis has to cover the whole chain from the button you press to the motor that moves the gate.
We price each job by the written estimate, so there’s no guessing. You’ll know what the repair costs before we start. For a closer look at what we handle day to day, see our gate repair page.
What Affects Gate Repair Pricing in Highlands Ranch
Highlands Ranch isn’t a generic market. Several local factors shape what gate repair actually costs here.
- HOA-governed entries. A large share of Highlands Ranch neighborhoods sit behind community or sub-association access gates. Those gates serve dozens of homes and run constantly, which wears operators and hardware faster than a single residential gate. When an HOA gate fails, the repair is often on a commercial-grade operator, and that’s priced differently than a driveway gate.
- Electric and automatic systems. Most Highlands Ranch driveway gates are automatic. That adds an operator, a control board, safety sensors, and low-voltage wiring to every diagnosis. Electric gate repair done right means tracing the whole system, not just swapping a part and hoping.
- Wind exposure on the Front Range. Highlands Ranch sits on the eastern edge of the foothills, and the open ground west of the community funnels wind across gate lines. Wind load stresses hinges, rollers, and latches, and it can push a swing gate out of alignment over time. Heavier hardware and proper anchoring cost more up front but last longer.
- Freeze and thaw cycles. Ground movement from freeze and thaw is hard on slide gate tracks and post footings. A track that heaves out of level has to be reset, not just adjusted, and that’s a bigger repair than a worn roller.
- Gate material and weight. Ornamental iron, steel, and cedar gates all carry different loads. Heavier gates need heavier hardware and put more strain on operator motors, which affects both the repair and how often it comes up.
- Brand and part availability. We work with nine major operator brands, from budget residential units like Mighty Mule and Ghost Controls to commercial systems like FAAC, BFT, and DoorKing. Knowing the brand means we diagnose by system knowledge instead of guesswork, which keeps the labor side of your repair down.
Manual Gate Repair vs. Electric Gate Repair: What Changes the Price
The single biggest price divider is whether the gate is manual or automatic. A manual swing gate is a mechanical system: hinges, a latch, maybe a post. When it sags or sticks, the fix is usually in the hardware, which keeps the repair at the lower end of the range.
An automatic gate adds a layer of electronics on top of the mechanical system. That means the diagnosis has to sort out whether the problem is mechanical (the gate is binding, and the operator can’t overcome it) or electrical (the operator is fine, but a sensor, a board, or a remote isn’t triggering it). Electric gate repair requires testing the operator, the control board, the safety sensors, the wiring, and the access device all at once. That’s the work most general handymen and fence companies aren’t set up for, and it’s exactly the work we do.
If your gate has an operator from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule, we already know the system. We work on the brand you already have rather than pushing you toward a replacement you don’t need.
Safety note on electric gate operators
Electric gate operators run on line voltage and store energy in capacitors even after the power is cut. Wiring, control boards, and safety devices are not a homeowner repair. If your gate has a live electrical fault, a sparking control box, or a sensor that isn’t reversing the gate, stop using it and have a trained technician look at it. A gate that fails to reverse on contact with an obstruction is a genuine hazard, especially on a driveway where kids and pets move through. The same goes for a heavy slide gate that has come off its track; it can crush or pin someone. Call us at (866) 509-8380 and we’ll get a technician out to make it safe.
How to Save on Gate Repair
There’s no shortcut around good diagnosis, but there are real ways to keep the number down.
- Get it looked at early. A gate that’s starting to sag or drag is a small hardware repair. Left alone, the binding wears out the operator motor, and now you’re paying for both. Catching it early is the cheapest thing you can do.
- Fix the cause, not the symptom. If a hinge keeps loosening or a track keeps shifting, the underlying alignment or footing issue needs to be corrected. Replacing the same part twice costs more than fixing the root cause once.
- Know your brand. When you call, have the operator brand and model ready if you can find it on the housing. It helps us bring the right knowledge and the right parts, and it shortens the diagnosis.
- Ask about repair vs. replace. Sometimes a control board replacement costs nearly as much as a new operator, and sometimes it’s a fraction. We’ll tell you which one makes sense for your gate and your budget.
- Get a free estimate in writing. We price each job by the written estimate, so you know the number before any work starts. Call (866) 509-8380 and we’ll set up a free on-site estimate.
When Repair Makes More Sense Than Replacement
Homeowners in Highlands Ranch ask us this constantly, and the honest answer depends on the gate, not a sales target. Repair usually wins when the gate structure is sound and the problem is a component: a control board, a sensor, a hinge, a roller, or a remote. Those are contained fixes, and the gate keeps its alignment and its fit with the rest of the entry.
Replacement starts to make sense when the gate itself is failing (rotted posts, cracked welds, a bent frame), when the operator is at the end of its service life and parts are hard to source, or when the gate no longer meets the HOA’s access requirements. Heavier commercial operators on HOA and apartment gates are often worth rebuilding rather than replacing because the housing and hardware are built to last.
We’d rather repair what you have than sell you a new gate. That’s the whole point of being a specialist: we know the difference, and we’ll tell you straight. If a replacement is genuinely the better call, we handle new gate installation too, so you don’t need a second vendor.
What Happens When You Call
When you call (866) 509-8380, we ask a few questions about the gate: manual or automatic, swing or slide, the operator brand if you know it, and what it’s doing (or not doing). That gets us pointed in the right direction before a technician arrives. We answer 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday. If your call comes in outside those hours, we’ll book you into the next opening.
A technician comes out, diagnoses the gate, and gives you a written estimate before any work begins. If it’s a straightforward repair, we can often complete it on the same visit. If it needs a part, we’ll tell you what it is, what it costs, and when we can get it. Same-day service is common for Highlands Ranch calls, and the estimate is free either way.
FAQs – Gate Repair Cost
How much does gate repair cost in Highlands Ranch?
Gate repair in Highlands Ranch typically costs $185 to $650, with most jobs landing between $250 and $475. Manual gate hardware repairs sit at the low end, and electric gate repairs involving the control board, motor, or safety sensors sit at the high end. Call (866) 509-8380 for a free estimate on your specific gate.
How much does electric gate repair cost?
Electric gate repair usually runs $300 to $650, depending on whether the fix is a sensor, a control board, or the motor and drive components. An operator diagnosis alone is often in the $250 to $400 range before parts. The written estimate sets the final number, and estimates are free. Call (866) 509-8380.
Is it cheaper to repair or replace a gate?
Repair is usually cheaper when the gate structure is sound and the problem is a component like a hinge, roller, sensor, or control board, often $185 to $650 versus the cost of a full replacement. Replacement makes more sense when the gate frame is failing or the operator is past its service life. We’ll tell you which is the better call on-site. Call (866) 509-8380.
Can you come today?
We can usually get a technician out the same day for Highlands Ranch calls. We answer 24/7, and we dispatch technicians from 7am to 7pm, Sunday through Friday, so a call placed during those hours has the best shot at same-day service. Call (866) 509-8380 to check availability.
Do you charge for an estimate?
No. Estimates are free, and we price each job by the written estimate before any work begins. That means you’ll know what your gate repair costs before we start, with no surprises. Call (866) 509-8380 to schedule a free on-site estimate.
Get a Free Gate Repair Estimate in Highlands Ranch
A gate that won’t open is worth fixing right, and the best way to know your number is a free estimate from a specialist. We’re Stratford Gate Repair, and gates are all we do, from a sagging manual swing gate to a commercial operator at an HOA entry. Our technicians have up to experience, we’re licensed and insured, and we work on the brand you already have.
Call (866) 509-8380 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Whether you’re in Highlands Ranch or another Front Range community, we’ll get you back up and running.
Written by the team at Stratford Gate Repair.
Pricing reflects the Highlands Ranch market as of 2026. Stratford Gate Repair offers free estimates – call (866) 509-8380.
What Our Customers Say
"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Ernesto Torres"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Lucia Herrera"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Eric Norris