Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Commerce City
A gate that won’t close leaves a driveway, a yard, or a whole commercial lot exposed, and we treat it that way. We’re gate specialists, not generalists, and we work on the systems Commerce City actually has: rusty swing gates on the older west-side lots, vinyl and ornamental driveway gates in the newer subdivisions, and heavy sliding security gates along the industrial corridors. Our technicians have up to experience diagnosing by system knowledge rather than guesswork, and we handle the brands you already own – BFT, Linear, Viking, Ghost Controls and more. Call (866) 509-8380. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We know Commerce City, from the tract blocks of 80022 to the warehouse parcels off the turnpike, and that local knowledge is what separates a real fix from a patch that fails at the next freeze.
Why Commerce City Homeowners Call Stratford Gate Repair for Gate Repair
We’re a dedicated gate company. Every tool, every part we keep, and every skill our technicians build is aimed at gates – manual swing, ornamental steel, chain-link, and the electric and automatic operators that run them. That focus is why a property manager in Commerce City can call once and get diagnosis, repair, and, if the gate is beyond saving, a full replacement planned by the same people.
Our technicians have up to experience, and we’re familiar with the operators you’ll find on both sides of Commerce City. Budget residential openers like Mighty Mule and Ghost Controls get the same attention as the commercial-grade FAAC, BFT, and DoorKing systems running slide gates near the industrial corridors. We diagnose by brand and system type, so you’re not paying for someone to learn your gate on your time.
Response matters here. When wind or a hard freeze takes a gate down, we get to Commerce City fast – same-day service for repairs when you call during dispatch hours. We’re licensed and insured, our estimates are free, and the price is agreed before any work starts. That’s the whole promise: we tell you what’s wrong, what it costs, and we fix it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Commerce City
Driveway Gate Repair in Commerce City usually starts with a gate that drags, binds, or won’t latch after a spring windstorm, and the cause is almost always mechanical at the base. The hinge post has heaved from Colorado’s freeze-thaw cycles, the gate has sagged against a misaligned rack and pinion, and the operator strains to push a panel that’s fighting the ground. A typical driveway gate repair of this kind runs $180 to $420, as an estimate, covering resetting the footing, correcting the sag, and checking the hardware and operator engagement. Hinges, latches, and realignment are common add-ons. The written estimate sets the final price, and it’s quoted before we start.
Hinge and post reset
When a post heaves out of plumb, the gate above it hangs crooked no matter how many times you adjust the hinges. We reset the footing to proper depth and true the post, then rehang the panel so it swings and latches cleanly. That’s the fix that lasts through the next freeze.
Realignment and sag correction
A gate that sags on one side puts uneven load on the operator and wears the track or wheel carriage faster. We correct the alignment at the frame and hardware, not just at the latch, so the panel closes squarely and the operator stops working against itself. If your gate needs this, book it through our gate repair team and we’ll get you a written price.
Gate Welding in Commerce City
Gate Welding in Commerce City is often the honest answer for older metal gates that have bent, rusted through at a joint, or lost a hinge mount to years of wind and weather. Wind-bent swing gates on the aging west-side lots and rusted chain-link frames are exactly the kind of repair a weld and a rust treatment can bring back, and a weld-and-rust repair typically runs $150 to $350 as an estimate, depending on the number of joints and how much prep the metal needs. We clean, weld, and treat the repair so it holds. The written estimate sets the final price.
Rust treatment and joint repair
Rust starts at the joints and welds, where water sits and the finish wears first. We grind back the corrosion, weld the failed section, and treat the metal so the repair isn’t the next thing to rust. That’s a one-time visit priced per job after we look at the gate.
Wind-bent frame straightening
Colorado’s dry, windy springs bend light-gauge frames and tweak hinges out of line. We straighten or sister the bent section back to square so the gate closes on its stops again. A frame that’s bent beyond safe straightening gets an honest recommendation for replacement instead.
Trusted Brands We Service in Commerce City
We work on the brand you already have. That includes BFT, Linear, Viking, and Ghost Controls, plus LiftMaster, FAAC, DoorKing, Elite, and Mighty Mule across residential and commercial applications. We don’t claim to stock every part locally – gate operators and their internals vary too much for that – but our brand familiarity means fast, accurate diagnosis instead of a guessing game, and a quick turnaround once the right part is in hand. Whether your gate runs on a budget residential opener or a high-cycle commercial operator, the same specialist knowledge applies. One call covers diagnosis, repair, and, if needed, full replacement and installation.
Common Gate Repair Problems We See in Commerce City Homes
- Hinge posts frost-heaved out of plumb. Colorado’s hard freeze-thaw cycles push posts out of the ground and out of line, so swing gates sag and bind no matter how the hinges are adjusted. It’s the single most common call on the older residential lots.
- Wind-bent and rusted metal gates on aging west-side lots. Dry, windy springs bend light frames and twist hinges, and years of weather rust the joints. These gates stop closing squarely and start wearing at the latch.
- Hail-dented and freeze-damaged automatic operators. Front Range hail takes a toll on operator housings and control boards on commercial slide gates along the industrial corridors. What looks like a control fault is sometimes storm damage underneath.
- Summer sun warping vinyl and untreated wood. The same summer that bakes a vinyl gate panel also warps untreated wood, so gates that ran true in spring start to stick by July. Catching it early keeps the operator out of the repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Commerce City, CO
Honest numbers help you plan. A typical driveway gate repair in Commerce City runs $180 to $420 as an estimate, covering realignment, hinge and post work, and operator re-engagement. Weld and rust repair runs $150 to $350. Lock and latch repairs fall on the lower end, and full electric or automatic gate repair that involves an operator or control board sits higher because the diagnosis is deeper. What moves the price is the ground condition at the post, how far out of alignment the gate has drifted, and whether the operator itself was damaged. Winds around Commerce City that bend gates also punish operators, so we price the gate and the opener together when that’s what’s needed. The estimate is free, and the price you agree to is the price you pay – the written estimate sets the final price, quoted before any work starts.
We Also Serve Cities Near Commerce City
We work across the north metro, so gate repair in Commerce City often spills over into the surrounding cities. If you’re just outside the Commerce City line, we also cover Thornton, Denver, Westminster, and Northglenn. Same specialists, same brand familiarity, same written estimate before any work starts. Call and we’ll confirm coverage for your address and get you a time.
Serving Commerce City, CO – Our Local Coverage Area
We serve Commerce City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Commerce City
Most sagging gates in Commerce City come down to frost-heaved hinge posts, not worn hinges. Colorado’s freeze-thaw cycles lift and shift a post a little each winter until the gate above it hangs out of plumb. The fix is resetting the footing to proper depth and truing the post, then rehanging the panel. Call (866) 509-8380 for an exact quote – estimates are free.
Use the manual release key or lever your operator manufacturer provides, and follow their procedure for your model. On most slide and swing operators there’s a release that disengages the motor so you can move the gate by hand – but a gate with no power has no safety photocell running, so move it slowly, keep hands and feet clear of the travel path and hinges, and never stand in the gate’s swing or slide zone. Heavy panels can crush. If the gate is stuck partway, call a trained professional rather than forcing it. Call (866) 509-8380 – we can walk you through safe options.
Often yes. Hail damage on a commercial slide gate is usually in the operator housing, control board, or panel skin, and each is repairable or replaceable. We check the operator internals for moisture and board damage before we sign off, since a dented housing can hide a failing control. Call (866) 509-8380 for a free estimate.
Chain-link gates are lighter and flex more, so they’re prone to frost-heaved posts and wind-bent frames; ornamental steel is heavier and depends more on solid hinges and welds. Each takes a different repair approach and a different parts set. We handle both, and we price each as its own job with a written estimate. Call (866) 509-8380 for an exact quote.
Automatic gate operators are generally expected to have safety devices that stop or reverse the gate when something is in its path, and photocells are the common solution. Rules can vary by property type and jurisdiction, so ask the city about permits and the current requirement, and never run an operator with the safety edges or photocells disabled. We verify them on every repair. Call (866) 509-8380 – estimates are free.
Get Your Gate Back Up and Running in Commerce City
Whether you’re on an older tract lot fighting a sagging swing gate or managing a commercial slide gate near the industrial corridor, one call covers diagnosis, repair, and replacement if you need it. We’re gate specialists, not generalists, and we work on the brand you already own. Call (866) 509-8380 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Stratford Gate Repair.