Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Aurora
If your electric gate has stopped opening, is dragging, or keeps tripping its safety sensor, call Stratford Gate Repair at (866) 509-8380. We’re a gate-specialist company, which means every call is handled by technicians who work on operators and gate hardware every day, not generalists figuring it out on your driveway. Our technicians have up to experience, and we bring that to Aurora properties across the city. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Aurora gates fail differently than gates in Denver, and that’s not a sales line. It’s clay. More on that below.
Why Aurora Homeowners Call Stratford Gate Repair for Electric Gate Repair
Most calls we get from Aurora come from two kinds of properties: HOA-managed subdivisions where the gate has to match an architectural standard, and older homes where the operator was added years after the gate was built. Both create problems a generic handyman can’t untangle.
We’re a dedicated gate company, and that focus is the whole point. From the opener to the hardware, we diagnose by system knowledge rather than guesswork, and we work on the brand you already have. That matters in Aurora, where you’ll see Mighty Mule operators on single residential driveways, LiftMaster on shared HOA entries, and FAAC or BFT running apartment and commercial gates.
Response time to Aurora is the same as anywhere else in our service area: we dispatch Sunday through Friday, 7am to 7pm, and same-day repair is often possible when you call early. For commercial and HOA entry systems, timing matters even more, since a stuck gate means residents can’t get in. We treat those calls with the urgency they deserve.
Our technicians have up to experience with gate systems specifically. That’s the training you’re paying for.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Access Control in Aurora
Gate Access Control in Aurora often starts with a question about who gets in and who doesn’t, and the equipment that answers it: keypads, remotes, card readers, and the control board tying them together. In HOA subdivisions and shared entries, that means the system has to work for dozens of residents while keeping the gate secure. When a keypad stops accepting codes or a remote stops triggering the operator, the fix is usually a control board or receiver issue, not a full replacement. We diagnose the specific component before quoting anything.
A typical keypad or access control repair in Aurora runs $150 – $350, depending on the panel and whether wiring has to be re-run. The written estimate sets the final price, and you’ll have it before we start.
Keypad and Remote Troubleshooting
Keypads fail from moisture getting into the housing or from worn contacts. Remotes fail from dead batteries, mismatched frequencies, or a receiver that’s lost its programming. We test each component in order so you’re not paying to replace parts that still work.
Control Board and Receiver Diagnostics
When a gate opens with the keypad but not the remote, or stops mid-travel for no obvious reason, the control board is the likely culprit. We read the board’s fault codes and check the receiver wiring before recommending a replacement.
Commercial Gate Operator in Aurora
A Commercial Gate Operator in Aurora on an apartment complex, HOA entry, or business driveway takes far more daily cycles than a residential operator, and the failure pattern shows it. Commercial gates on DoorKing or FAAC operators that see dozens of cycles a day wear out motors, gearboxes, and loop detectors much faster than a homeowner’s gate used twice a day. When a commercial gate goes down, the whole property feels it.
Commercial operator repair in Aurora typically runs $400 – $1,200 depending on the operator and the parts needed. Replacement of a full commercial operator is a separate quote after we’ve inspected the site. Estimates are free.
High-Cycle Operator Service
Operators rated for hundreds of cycles a day need their gearboxes and limit switches checked when the gate starts jerking or reversing. We work on FAAC, BFT, and DoorKing systems used in Aurora’s larger properties, and we know how each one behaves when it’s near end of life.
Loop Detectors and Safety Edges
A commercial gate that closes on a vehicle is usually a failed loop detector or a damaged safety edge. These are the components a property manager should never skip. We test entrapment protection as part of every commercial repair.
Trusted Brands We Service in Aurora
We work on the brand you already have, whether it’s an entry-level Mighty Mule on a single-family driveway or a LiftMaster, FAAC, or BFT system running an HOA or commercial entry. We don’t claim to stock parts on a truck; we diagnose, confirm the parts needed, and return to complete the repair. That means a fast turnaround once the right component is confirmed, and no guesswork on install day. If you’re not sure which operator you have, tell us what the label says or send a photo; we’ll identify it before we arrive so the visit counts.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Aurora Homes
Most Aurora gate failures trace back to one of four things:
- Hinge post heave from expansive clay. Aurora’s bentonite clay swells and shrinks with moisture, and freeze-thaw cycles push gate posts up and out of alignment. When the post moves, the gate racks, binds, and strains the operator even if the operator itself is fine.
- Builder-grade shallow footings in newer eastern subdivisions. Homes built in ZIP 80018 and 80013 often have gate posts set in concrete that’s too shallow for the soil movement here. The gate misaligns within a few years, and the operator gets blamed for a post problem.
- Dry summer heat warping wood gates. Aurora’s high-desert climate warps wood and cracks vinyl, throwing the gate leaf out of square. The operator works harder and the safety photocell starts tripping.
- HOA architectural rules complicating replacement. A damaged gate can’t just be swapped for any model. Style, height, and finish have to match what the HOA approved, which means getting sign-off before the work starts.
Pricing for Electric Gate Repair in Aurora, CO
Electric gate repair in Aurora typically runs $200 – $600 for most residential jobs, with the range set by the operator, the parts, and whether the post has to be re-set. Gate motor repair is usually $250 – $550. Opener and remote repair is often $150 – $350. Keypad and access control work runs $150 – $350. When the real fix is re-setting a hinge post in deeper concrete, that adds cost because it’s more than an adjustment: it’s a footing, and it’s often the reason a gate that “keeps breaking” actually stops breaking.
All prices are estimates. You get a written quote, you approve it, and that’s the price: quoted and agreed before any work starts. We don’t spring an invoice bigger than the quote on you. Free estimates, no service-call fee, price set per job.
We Also Serve Cities Near Aurora
We work throughout the metro area, so if you’re just outside Aurora, the same gate specialists can help. We serve Centennial, Denver, Commerce City, and Highlands Ranch, and our electric gate repair team handles the same operator brands and clay-related post problems wherever they turn up. If you’re unsure whether your address falls in our dispatch range, call and we’ll confirm.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Aurora
Yes, in most Aurora HOA communities, any change to gate style, height, finish, or operator needs architectural review approval before work starts. Routine repairs to existing equipment usually don’t, but replacements and upgrades do. Ask your management company which category your job falls into before scheduling, so you’re not caught waiting on paperwork after the work is quoted.
The main reason is Aurora’s expansive bentonite clay and severe freeze-thaw cycles. Those conditions heave and settle gate posts, especially in newer eastern subdivisions where build quality on footings varies. A gate post that moves racks the gate, strains the operator, and trips the safety photocell. That means the repair often involves re-setting the post in deeper concrete, not just adjusting the operator.
Not always. A LiftMaster or FAAC operator installation usually needs HOA approval if it changes the appearance of the gate or the entry hardware, and most Aurora HOAs require architectural review for that. Get written approval first, then schedule the install. We work on LiftMaster and FAAC systems routinely, so we can explain what the installation involves before you submit the paperwork.
Electric gates in Aurora should have entrapment protection that matches the gate’s design, which usually means safety photocells, safety edges, or loop detectors depending on the operator and the entry. These aren’t optional; a gate that closes without them is a hazard. We check all safety devices as part of every repair, and we test them before we leave.
Shared entry systems in Aurora gated communities use a keypad, card reader, or call box that runs to a control board managing every resident’s access. When one resident’s code stops working, the problem is often the individual code or the keypad, not the whole system. When the whole system goes down, it’s usually the control board or wiring. We diagnose which before quoting.
Call (866) 509-8380 for a free estimate on electric gate repair in Aurora. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Whether your gate is dragging, your keypad has quit, or your commercial operator needs a look, we’ll diagnose it carefully and give you a written price before any work begins.
Written by the team at Stratford Gate Repair.